15 Reviews.Roof Repair
Phone: (844) 292-8390
open 24 hours – 7 days a week
Solar Company in Brownsville
Don’t Think Building Your Own Solar Panel Is Too Difficult For You
While we’re accustomed to many types of energy and technology, the only power source we couldn’t live without is the sun. We obviously depend on the sun to heat our planet, but there are actually many diverse ways this energy can be harnessed for our daily use. With easy to install solar panels, it’s possible to get heat and electricity you can use for all of your power requirements.
It is not that difficult to build your own solar panels. You should know how to use a soldering iron and handle a saw, if you can do this your solar panels will be ready in no time. Basically, you will need solar cells, which can be found online, wood to build the container, Plexiglas for the cover and some equipment. You’ll also need some caulk to attach the solar cells to the wooden container. For wiring made easy, try to find solar panels that already have the tabs on them. Before you glue your solar panels in place you will have to solder tab on, if you are unable to find panels that have the tabs on them.
The plexiglass is for protection of your cells. Glue is used to attach the cells to the box, and you will need to glue some wood strips inside the box. Just a dot of silicone caulk in the center of the cell will keep the cells steady when the wood expands or shrinks. Solar cells can be damaged if the wood shifts, that is why you need to use a dot of caulk. After you have pushed the wires through the hole that you drilled make sure that you have filled it with caulk. The plexiglass will have to be screwed on and mounted where you want it.
With the DIY method of solar panel creation your will need to create a box for the solar cells to rest in groups within when the desired outcome is a solar panel. Wood is the most widely used material for these containers although there are a wide range of other materials that can also be used. You can use whatever wood type suits your fancy but we can recommend the usage of plywood. It is recommended that you have some wood inside the box to separate the cells and hold them upright as well as a covering of plexiglass over the top too. That plexiglass cover will allow sunlight to be absorbed by the cells while remaining protected from the elements. You will also need a whole in the bottom of the box that will allow you to pull the wires out of the box. You can use solder to connect all of these cells together once you’ve mounted the solar cells.
Undoubtedly, solar panel systems are the future for energy production for the home due to their cost-effectiveness over the long term as well as the fact that they are good for the environment. So, the sooner you get them installed, the more money you can save on electricity.
Solar Company in Olmito TX
Solar Company in South Padre Island TX
Solar Company in Santa Maria TX
Solar Company in Los Fresnos TX
Solar Company in Port Isabel TX
Solar Company in San Benito TX
Solar Company in Harlingen TX
Solar Company in Lozano TX
Solar Company in Los Indios TX
Solar Company in Rio Hondo TX
Cash & Check Our Brownsville Our Solar Installation Experts accept all forms of cash and check payments.
Other payment options may be available. Please call for more info.