15 Reviews.Roof Repair
Phone: (844) 292-8390
open 24 hours – 7 days a week
Solar Company in Arlington
Solar Panel Systems – The Benefits of Using Them
With the state of the global economy, more and more people are turning to solar energy. Installing solar panels will be high, but the expense will quickly be off set by the amount you will be saving on your electric bill. If you build your own solar panels you could save up to half the cost. This article is a comprehensive guide to build your own solar panels.
Solar panels are not that difficult to build at home. If you know how to use a soldering iron and are handy with a saw you can build your own solar panels in no time. Some of the items that you will need to build your own solar panels are, solar cells, wood for the container and some plexiglass for the cover. To attach your solar cells to the wooden container you can use caulk. If you can find solar cells that already have the tabs on them it will make wiring them up easier. If you can not find solar panels with tabs you will have to solder on the tabs before you glue them in place. If you have a 12 V battery, similar to those found in most vehicles, you are in luck as these are necessary to store the electricity generated by solar panels. Sealed lead acid batteries seem to be the most popular type because they are inexpensive, safe and robust. Many places will offer great deals on these types of batteries along with coupons at your local store. Storing electricity is only part of the process; you must convert this electricity into AC to be used at home or in your garage. If you already have a modified sine wave or true sine wave power inverter, you can use this energy. However, the best one is the one that creates the exact same type of electricity that comes out of the wall socket and that is the true sine wave. Of course, these models are more expensive than their modified counterparts, are well worth the cost.
Since solar panels are essentially a set of solar cells within a container, you will need to make a container if you are taking the DIY route with your solar panels. Because it is easer to work with than many of the other options for container creation, wood is the most obvious and widely used material. You can use whatever type of wood you like but plywood is a great option for the back. You’ll need wood inside the box that can hold the cells separate as well as a plexiglass covering for the box. Since sunlight needs to get into each cell, plexiglass coverings are perfect ways to protect the cells from the elements and still allow full sun exposure to the cells. It’s important that you remember to drill a whole for the wires to be pulled out of. Now that you have the cells mounted it becomes necessary to connect each to the next using a bit of solder.
When you look at economic conditions and how expensive oil and other traditional energy sources are getting, doesn’t it makes sense to seek alternatives? Solar energy gives you a viable option that frees you from being dependent on the power companies, no matter what happens in the future.
Solar Company in Fort Worth TX
Solar Company in Kennedale TX
Solar Company in Haltom City TX
Solar Company in Naval Air Station| Jrb TX
Solar Company in North Richland Hills TX
Solar Company in Colleyville TX
Solar Company in Haslet TX
Solar Company in Euless TX
Solar Company in Southlake TX
Solar Company in Azle TX
Cash & Check Our Arlington Our Solar Installation Experts accept all forms of cash and check payments.
Other payment options may be available. Please call for more info.